How do you reset the security system on a 2000 Pontiac Grand Prix?

Turn the ignition to the “ON” position but do not start the engine. Wait 30 seconds and start the engine. Verify that none of the security lights on the dashboard are flashing or illuminated. The theft system has been reset.

How do I get my car out of anti theft mode?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

Will disconnecting battery reset anti theft?

It is another way to solve the problem of anti theft system car wont start. Disconnect the positive terminal of the battery for a minute or two. … It will reset the computer system and your car is likely to kick off.

IT IS INTERESTING:  Can I get income protection if I'm self employed?

How do I disable GM Anti-theft system?

How to Disable a GM PassLock System

  1. Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
  2. Look at the dashboard and locate the theft system light. …
  3. Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

How do I permanently disable anti-theft system?

In order to deactivate the anti-theft system, car owners must press the unlock button located on the remote key. So it is suggested to use the key to unlock the door, then change the switch of ignition to “on” position.

Is there a fuse for the anti-theft system?

It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box. If you do not find an alarm fuse inside of the car, look in the fuse box under the hood on the driver’s side. Your car model may or may not have additional fuse boxes.

How do I get my car out of anti-theft mode without remote or key?

Disabling the Alarm Without a Remote

  1. Insert your key into the car’s ignition and turn the key to the “ACC” position.
  2. Locate the transmitter system for your alarm. …
  3. Repeatedly press and release the toggle switch on the system.

How do I reset my immobilizer?

To reset the immobilizer, hold down the panic button. Wait for ten minutes if you push the lock button two times.

IT IS INTERESTING:  What is cryptographic and network security?

How do I reset my Pontiac security system?

Turn the ignition to the “ON” position but do not start the engine. Wait 30 seconds and start the engine. Verify that none of the security lights on the dashboard are flashing or illuminated. The theft system has been reset.

What does it mean when the security light stays on in your car?

On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.

How do you reset the security system on a 2003 Pontiac Grand Am?

Turn the ignition key to the “Off” position for 10 seconds. 3. Repeat this process 3 times. This should reset the Security light/system and allow you to start your car.

How do you bypass Chevy anti-theft?

Insert the key in the ignition, and turn it to the “on” position. This causes the anti-theft light to blink on and off. Leave the key in the ignition for 10 minutes. Turn the key to the “off” position — and leave it there for 20 seconds — after the anti-theft light stops blinking.

How do you bypass an immobilizer?

You can bypass the immobilizer by placing the key in keyhole hence deactivating the car’s immobilizer to remote start. The added security with Mobokey allows the security to be activated as soon as the phone moves away from the car, so you don’t have to worry about car security.

IT IS INTERESTING:  Are retirement accounts protected by FDIC?

How do I reset my car alarm after changing the battery?

Car alarms rely on the electronic component of the vehicle, and disconnecting the battery should both silence the siren and reset your alarm. Open up the hood, locate the battery, and with a wrench, remove the negative terminal. Then reconnect it after a minute has passed.