The Disk Is Write-protected on USB/SD Card. … This disk is still healthy; it is just in the write-protected state. That is, you can only read data from your device, but you are not allowed to write, delete, copy or do any other operations to modify the data.
How do I remove write protection?
To remove the write protection, simply open your Start menu, and click on Run. Type in regedit and press Enter. This will open the registry editor. To finish, simply restart your system, and then reconnect your USB pen drive to the computer.
How do you remove write protection from a disk?
To remove write protection from your SD card, follow the quick guide below:
- Run Command Prompt as administrator.
- Type diskpart.exe.
- Type list disk.
- Type select disk + number.
- Type attributes disk clear readonly.
How can I unlock a protected disk?
Type select disk N (where N is the number of the disk that corresponds to the flash drive) and press Enter. Type attributes disk clear readonly and press Enter. This will unlock the device for writing.
Why is my disc write protected?
Some USB flash drives and SD cards have physical switches on the side to protect data. If the USB drive or SD card switch is locked, the device could become write-protected on all PC or devices. You can get out of this problem by turning off the switch.
What does write-protected mean on a SD card?
This “Write Protect!”…
This “Write Protect!” message means the SD or SDHC memory card you are using is locked. Remove the SD memory card from the AZ528 camera and switch the lever on the side of the SD card from the LOCKED position to the UNLOCK position.
What can I do if my pendrive is write-protected?
Go to My Computer/This PC and under Devices with Removable Storage, look for your pen drive device. Right-click on it and click Properties. Click Edit, in the pop-up box, sometimes there’s an option to Remove write-protection. Change the status of this option and try again.
How do I remove write protection from a DVD in Windows 10?
Disable Write Protected CD-RW
- Right-click Start , then select Run.
- Enter regedit in the Open: box and select OK.
- Locate and then click the following registry subkey: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl.
- In the left pane, right click Control key and select New -> Key.