In the 2020 edition of the NEC®, Section 210.12 requires that for dwelling units, all 120-volt, single-phase, 15- and 20-ampere branch circuits supplying outlets or devices installed in dwelling unit kitchens, family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, …
Where is AFCI required in a home?
AFCIs are required on all 120-volt, single-phase circuits with 15 to 20 amps supplying receptacles in all dwelling rooms. If, for example, if you use your basement as a living room, playroom, or recreational room, then you will need to install an AFCI protection.
What parts of a residence do not require AFCI protection?
AFCI protection is not required for outlets located outside or in garages or bathroom areas. (B) All 15A or 20A, 120V branch circuits supplying outlets in dormitory unit bedrooms, living rooms, hallways, closets, bathrooms, or similar areas.
What areas need arc fault breakers?
16 states that AFCI protection is required for all 120-Volt, single phase, 15 and 20 amp branch circuits supplying outlets or devices installed in living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, laundry areas, and similar rooms or areas.
Where are arc fault breakers not required 2020?
As long as branch circuits are not extended more than 6 feet, AFCI protection is not required. In the 2020 NEC, a public input (code change proposal) was accepted to clarify “6 feet”.
Do kitchens require AFCI?
The latest National Electrical Code requires both AFCI and GFCI protection only in kitchens and laundry rooms. And within those rooms, the Dual Function AFCI/GFCI Receptacle provides what is called “feed-through” protection, which means it provides protection for all wiring and extensions attached to the load side.
Does refrigerator need AFCI?
A modern refrigerator requires a dedicated 20-amp circuit. … This circuit usually does not require GFCI protection unless the outlet is within 6 feet of a sink or located in a garage or basement, but it generally does require AFCI protection.
Why are AFCI breakers so expensive?
Poorly installed electronics (such as a ceiling fan) can cause your newly installed AFCI breaker to constantly trip. If this is the case, the electrician will need to fix the faulty wiring in order for the AFCI breaker to work properly and this will increase your overall cost.
Does laundry room need AFCI?
All 120-volt, single-phase, 15- and 20-ampere branch circuits supplying dwelling unit kitchens and laundry areas now require AFCI protection. Code Change Summary: Revisions were made expanding AFCI protection to include, kitchens and laundry areas and also to apply to devices.
Do light circuits require AFCI?
The NEC requires that virtually all branch circuits for lighting and receptacles in a home must have arc-fault circuit-interrupter (AFCI) protection. This is a form of protection that guards against sparking (arcing) and thereby reduces the chance of fire.
What type of circuit breaker is used in houses?
Single-pole circuit breakers are the type most often found in homes today. They’re named single-pole because they’re designed to monitor the current of a single wire and trip in the event of a short or electrical overload.
Do garages need AFCI protection?
The 2017 National Electrical Code (NEC) requires the protection of an arc fault circuit interrupter (AFCI) for 15 and 20 amp circuits in all newly built residential areas, but they are not needed in bathrooms, garages, or outdoor areas.
Can I use AFCI outlet instead of breaker?
Why would I use AFCI outlet instead of breaker? The AFCI outlet can be a great alternative depending on the circumstance. AFCI outlets work with any type of wiring and are not dependent on the type of breaker in the panel.
Does furnace need AFCI?
Yes, you need AFCI protection
As of the 2017 NEC, AFCI protection has been extended to all 15 and 20A, 120V branch circuit outlets in all dwelling unit locations. This includes dedicated appliances such as furnaces and dishwashers, and even smoke detector circuits.