The Excavation standards do not require a protective system when an excavation is made entirely in stable rock or when an excavation is less than 5 feet (1.52 meters) deep and a competent person has examined the ground and found no indication of a potential cave-in.
Is fall protection required in an excavation?
OSHA requires that fall protection be provided when working over dangerous equipment and machinery, regardless of the fall distance. But OSHA does not require fall protection around excavations or trenches unless there exists the additional hazard of a barrier that hides the excavation or trench from plain view.
At what depth does an excavation need cave in protection?
Trenches 5 feet (1.5 meters) deep or greater require a protective system unless the excavation is made entirely in stable rock. If less than 5 feet deep, a competent person may determine that a protective system is not required.
At what depth of a trench does OSHA require fall protection when the excavation are not readily seen because of plant growth or other visual barrier?
Specifically, you ask if fall protection is required around vertical walled trenches that have a depth 6 feet or greater; if there are any exceptions to fall protection around trenches implied or stated; and whether a controlled access zone be used in lieu of fall protection.
At what depth is it compulsory to install trench support?
Regulation 306 A person conducting a business or undertaking who proposes to excavate a trench at least 1.5 m deep, must ensure, so far as is reasonably practicable, that the work area is secured from unauthorised access (including inadvertent entry).
At what height is fall protection required in construction?
The 6-foot rule. Subpart M requires the use of fall protection when construction workers are working at heights of 6 feet or greater above a lower level.
Does OSHA require fall protection training?
Cal/OSHA does not require recertification for construction fall protection. Before entering a construction site, fall protection training is required. Cal/OSHA may require retraining if a near-miss accident or fatality occurs at the site.
Is it permissible to enter an excavation?
Never enter an unprotected excavation to obtain a soil sample. Take the soil sample from freshly dug material in the spoil pile. The tests should be done as soon as possible to preserve the sample’s natural moisture.
Is an excavation a confined space OSHA?
A confined space has limited or restricted means of entry or exit and is not designed for continuous occupancy by a worker. … Open trenches and excavations such as building foundations aren’t generally considered confined spaces; they are regulated under OSHA’s excavation standard, 29 CFR Part 1926, Subpart P.
How far away must you stay from equipment being loaded or unloaded?
Beware of Falling Loads
Likewise, no work should be done under suspended or raised loads due to the dangers of falling loads present. In fact, OSHA requires worksite equipment to be stored at least 2 feet away from the trenching edge.
What is considered fall protection?
Fall protection is the use of controls designed to protect personnel from falling or in the event they do fall, to stop them without causing severe injury. … There are four generally accepted categories of fall protection: fall elimination, fall prevention, fall arrest and administrative controls.
At what height and above is fall protection required on a scaffold?
The standard requires employers to protect each employee on a scaffold more than 10 feet (3.1 m) above a lower level from falling to that lower level.
What are the three main protection methods against cave ins?
To prevent cave-ins:
- SLOPE or bench trench walls.
- SHORE trench walls with supports, or.
- SHIELD trench walls with trench boxes.
How far away from the excavation should the spoils be placed?
The recommended minimum distance for location of excavated soil (spoil) from the edge of the excavation is equal to or greater than the excavation depth. However, the minimum permissible distance of spoil from the edge of the excavation is 0.6 metres for every one metre of excavation depth.
What would be required if the excavation was deeper than 1.5 Metres?
If excavating a trench greater than 1.5 metres deep or using mobile plant in or around an excavation, you are generally required to prepare a safe work method statement and prevent unauthorised access (including accidental entry).
When must an excavation inspection be undertaken?
Inspection. A competent person who fully understands the dangers and necessary precautions should inspect the excavation at the start of each shift. Excavations should also be inspected after any event that may have affected their strength or stability, or after a fall of rock or earth.